Thursday, July 3, 2008

TRANS FRONTIER CONSULTANTS FABRICATED AND ERECTED LPG TANK ON WAY TO CENTRAL ASIA FROM


Propane is the most common form of liquefied petroleum gas (LPG) that can be used as a fuel in areas where no gas mains are installed. A byproduct of the oil refining process, it is compressed into a liquid for ease of storage and delivery. In a domestic storage tank, fuel vaporizes in the upper part of the vessel which can be tapped for use as a cooking and heating gas. Its pressure is regulated down to a level compatible with the appliances it runs. In cold climates, the ambient temperature is sometimes too low for the propane to vaporize fast enough, in which case a heat source, known as a vaporizer must be used. In its natural form, Propane has no smell and an odorant is added before distribution, for safety reasons.

The propane industry uses many different types and sizes of tanks, from 30,000 or more gallons at the distributor, to a barbecue cylinder. Trans Frontier Consultants ASME propane tanks are built to 250# working pressure. Under normal circumstances, the vapor pressure at 100ºF is 172 psi.

These LPG tanks can be fixed on ground or over ground and also mounted on chasis to be towed behind prime mover as shown in the picture.


No comments:

Post a Comment

Note: Only a member of this blog may post a comment.